Equipment Directory

  Add equipment

couplings / pin
public
Pin Coupling
The normal couplings NC and the light couplings LC are designed to transmit torque from 27 to 7160 Nm. The torque is transmitted through pin mounted rubber rings.
Supplier: Modul
Torque range: 27 - 7160 Nm
Speed range: 5600 - 1300 rpm
pumps / centrifugal
public
NPE - NPE 80-180-350HP
Renowned for its durability and performance, the NPE 80-180-350HP pump is the right choice when you need a solution that will deliver day-in and day-out.
Supplier: National Pump & Energy
Maximum Head: 201 m
Max Flow: 106 L/s
Solid Handling: 25
pumps / centrifugal
public
NPE - NPE 100-100-250HP
Mobile pump for hire.
Supplier: National Pump & Energy
Maximum Head: 100 m
Max Flow: 100 L/s
pumps / centrifugal
public
Minetuff Pump - 5kW-HH
The pump wet end is standard polyurethane coated, for extra wear protection against sand, silt & fines. This pump is relatively light weight and ideal for using in conjunction with a jumbo drill rig.
Maximum Head: 43 m
Max Flow: 13.7 L/s
Size: 420 x 332 x 760
Priming System: Submersible
hoists / wire rope
public
K - Series Hoist
Manufactured since 1972, Condra's K-Series hoists have been installed worldwide under a wide variety of operating conditions, and in configurations that include foot-mounted, monorail and double rail crab configurations. Lifting and reeving arrangements
Supplier: Condra
Capacity: 1 - 40 t
Lifting speed: 1 - 12 m/min
Lifting height: 6 -24 m
couplings / fluid
public
Fluid Coupling
Power Transmission through hydraulic fluid/water without mechanical connection between input and output of driver or driven machine.
Supplier: Vulkan Australia
Fixed Speed Power Range: up to 1850 kW
Variable Speed Power Range: up to 11000 kW
Fixed Speed Starting Torque: 80 - 275 %
couplings / tyre
public
Flexible tyre coupling
A tyre coupling is an elastic coupling and consists of a flexible element, the tyre, and two coupling halves, also referred to as the hub or flange.
Supplier: Modul
Torque range: 3 - 7000 Nm
Speed range: 3500 - 1100 rpm
valves / ball
public
Flanged Ball Valve - One Piece - Series RF15/RF30
Design standard: ASME B16.34, API 608, MSS SP72, NACE MRO175. Testing standard: API 598, ASME B16.34, MSS SP 61. Certifications: API 607.
Supplier: Bray International - Sydney
Size: 1 - 12 in
Body Material: Stainless Steel (CF8M), Carbon Steel (WCB), Special Alloys
Temperature range: -46 to 343 deg C
Stem Material: ASTM A479 Gr 316, 174-pH, Monel
Pressure Rating: RF15: Flanged ASME Class 150 RF30: Flanged ASME Class 300
Seat Material: Standard: TFM 1600 Optional: Tek-Fil, PEEK, RPTFE, UHMWPE, Metal
Ball Material: Stainless Steel (CF8M)
Port Type: Standard Port
Cv: 32 - 7700
brakes / disk
public
ELECTROMAGNETIC DISC BRAKE
Electromagnetic Disc Brake spring applied and electromagnetic released Each model of brake can be equipped with a variety of accessories to comply with the most demanding applications, including pad wear compensation system, brake status micro switch and
Supplier: Vulkan Australia
Nominal Braking Torque Range: 15 - 11545 Nm
couplings / rigid
public
DENFLEX
Torsional rigid coupling, the flexibility of which is guaranteed by crowned gear teeth profile.
Supplier: Vulkan Australia
Nominal Torque Range: 1000 - 560000 Nm
Rotational Speed: 1200 - 8000 rpm
valves / knife-gate
public
Bidirectional Knife Gate Valve - Series 762
Mining: Primary Milling, Secondary Milling Actuator Options: Direct Mounted Handwheel, Bevel Gear Operator, Double Acting Pneumatic Actuator, Hydraulic Actuator, Electric Actuator. Certifications: Canadian CRN, PED - Category I Module A (Group 2 Liquids).
Supplier: Bray International - Sydney
Size: 3 to 48 in
Body material: Ductile Iron (3" - 28") Carbon Steel (30" - 48") Check with factory for other available materials
Pressure rating: 316 SS Gate 3" - 24" 7 bar; 26" - 42" 5 bar; 44" - 48" 3 bar (Higher pressures are available with select gate mate
Stem material: 304 Stainless Steel
Gate material: 304, 316, 317 Stainless Steel, SAF 2507 Duplex, 17-4PH Stainless Steel, Hastelloy® C, Monel®, Titanium, Duplex 2205
Seat material: Nat. Rubber: 74°C Buna-N: 90°C EPDM:150°C
Flange Drilling: ASME B16.5 CL150; ASME B16.47 CL150
valves / ball
public
Ball valve - flanged - two piece - F15 / F30
Applications: Process, Tank Farms, Fueling, Oil & Gas. Design standard: ASME B16.34, API 608. Testing standard: API 598. Certifications: API 607, NACE MR0175, PED 2014/68/EU, ATEX 94/9/EC, GOST-R, SIL IEC 61508 SC 3.
Supplier: Bray International - Sydney
Size: 1/2 - 12 in
Body Material: Stainless Steel (CF8M), Carbon Steel (WCB), Special Alloys
Temperature range: -46 to 343 deg C
Stem Material: ASTM A479 Type 316
Pressure Rating: F15: ASME Class 150, F30: ASME Class 300, PN10 - PN40
Seat Material: Standard: TFM 1600 Optional: Tek-Fil, PEEK, RPTFE, UHMWPE, Metal, Cavity Filler
Ball Material: ASTM A351 Gr CF8M
End Connection: ASME Class 150, ASME Class 300, PN10 - PN40, EN 1092-1
Port Type: Full Port
Cv: 32 - 21000
valves / ball
public
Ball Valve - 3-Piece - Triad
Applications: Process, Steam, Fire Safe, Industrial Gases. Design standard: ASME B16.34 Class 600. Testing standard: API 598, MSS SP-72. Certifications: API 607 4th Edition, NACE MR0175.
Supplier: Bray International - Sydney
Size: 1/4 - 4 in
Body Material: Stainless Steel, Carbon Steel, Special Alloys
Temperature range: -46 to 287 deg C
Stem Material: 316
Pressure Rating: 151 Bar
Seat Material: Standard: TFM 1600, Optional: Tek-Fil, PEEK, UHMWPE, RPTFE, Metal, Cavity Fillers
Ball Material: Stainless Steel
End Connection: Threaded ASME B1.20.1 NPT, Socket Weld ASME B16.11, Extended Socket Weld, Butt Weld ASME B16.25, Extended Butt Weld, Flanged Class 600, ASME B16.10, ASME B16.5
Port Type: Full Port 1/4 - 4 , Standard Port 3/4 - 2 1/2 in
Cv: 8 - 2117
pumps / centrifugal
public
8/6E-G Gravel Pump
The SG range of dredge and gravel pumps is designed to provide continuous pumping of highly abrasive slurries containing large particles at high maintained efficiencies with low maintenance and ownership costs.
Supplier: CNSME
Pump model: SG/200F
Max head: 52 m
Max flow: 770 m3 / hr
pumps / centrifugal
public
6/4D-AH Hard Metal Slurry Pump
Our horizontal slurry pumps are designed for heavy duty applications such as mining, minerals processing, mill discharge, power plants, tailings and other industrial applications, for maximum abrasion, erosion and corrosion resistance.
Supplier: CNSME
Model Number: SH/100D
Max Head: 90 m
Max Flow: 600 m3 / hr