Equipment Directory


actuators / pneumatic
public
Rack and Pinion Pneumatic Actuator - Series 92-93
Valve Compatibility: Butterfly Valves, Ball Valves. Certifications: ABS, ATEX, Bureau Veritas, PED, SIL 3. Options: Single or Double Acting, Extended Travel Stops.
Supplier: Bray International - Sydney
Size: 48 - 119
Output torque: Up to 4986 Nm
Design standard: EN 15714-3
Mounting: ISO 5211 - 2001
Acting: Single acting
Temperature range: -40 to 149 deg C
Pressure rating: Up to 10 Bar
Enclosure rating: IP66/IP67M per IEC 60529
Testing standard: EN 15714-3 2009
Control options: On-Off, Throttling, Double Acting, Spring Return
brakes / disk
public
ELECTROMAGNETIC DISC BRAKE
Electromagnetic Disc Brake spring applied and electromagnetic released Each model of brake can be equipped with a variety of accessories to comply with the most demanding applications, including pad wear compensation system, brake status micro switch and
Supplier: Vulkan Australia
Nominal Braking Torque Range: 15 - 11545 Nm
couplings / flexible
public
SPEFLEX
Torsional flexible coupling with a fabric reinforced elastic element that is suitable for motion reversals and multidirectional flexibility.
Supplier: Vulkan Australia
Nominal Torque Range: 45 - 2500 Nm
Rotational Speed: 3600 - 5000 rpm
couplings / fluid
public
Fluid Coupling
Power Transmission through hydraulic fluid/water without mechanical connection between input and output of driver or driven machine.
Supplier: Vulkan Australia
Fixed Speed Power Range: up to 1850 kW
Variable Speed Power Range: up to 11000 kW
Fixed Speed Starting Torque: 80 - 275 %
couplings / highly flexible
public
RATO S
Rigidly or flexible mounted engines such as compressors or pumps in a high torque range.
Supplier: Vulkan Australia
Torque range: 16000 - 315000 Nm
couplings / rigid
public
DENFLEX
Torsional rigid coupling, the flexibility of which is guaranteed by crowned gear teeth profile.
Supplier: Vulkan Australia
Nominal Torque Range: 1000 - 560000 Nm
Rotational Speed: 1200 - 8000 rpm
hoists / wire rope
public
K - Series Hoist
Manufactured since 1972, Condra's K-Series hoists have been installed worldwide under a wide variety of operating conditions, and in configurations that include foot-mounted, monorail and double rail crab configurations. Lifting and reeving arrangements
Supplier: Condra
Capacity: 1 - 40 t
Lifting speed: 1 - 12 m/min
Lifting height: 6 -24 m
hoists / wire rope
public
Titan Compact Series
Condra's Compact hoists deliver all the modular capabilities of the earlier K-Series in any application, but in a refined and more compact design.
Supplier: Condra
hoists / wire rope
public
Titan SH - Series Hoist
Condra's SH (Short Headroom) Titan hoists are designed to make maximum use of expensive factory space - headroom as well as floor. Based on the massively successful K-Series, this new design has reduced the size of many K-Series components to take height
Supplier: Condra
pumps / centrifugal
public
VASA HD Series Slurry Pump
VASA HD Series slurry pumps are designated for the tough applications in the mineral processing industry. The excellent hydraulic design guarantees maximum efficiency throughout the life of the generously sized wear parts.
Supplier: Metso Outotec
Flow rate: up to 1000 m³/h
Head: up to 55 m
Max. operating pressure: 25 bar
Inlet: 150 - 400 mm
Outlet: 100 - 350 mm
Motor power: 55 - 200 kW
ropes / steel
public
Wire rope HYFLEX 6x36
Construction: 6x36(14-7+7-7-1)-CWR. Langs lay must only be used in applications where both ends are unable to rotate.
Supplier: usha martin
Diameter: 8 to 60 mm
Approx. mass: 26.1 to 1471 kg/100m
Tensile grade: 1770 and 1960 N/mm2
Minimum breaking force: 40.3 to 2510 kN
Finish: Bright, Galvanised
Lay direction: Right hand, Left hand
Lay type: Ordinary, Langs
Compacted: Yes, No
Average fill factor: 60.9 %
valves / ball
public
Ball Valve - 3-Piece - Triad
Applications: Process, Steam, Fire Safe, Industrial Gases. Design standard: ASME B16.34 Class 600. Testing standard: API 598, MSS SP-72. Certifications: API 607 4th Edition, NACE MR0175.
Supplier: Bray International - Sydney
Size: 1/4 - 4 in
Body Material: Stainless Steel, Carbon Steel, Special Alloys
Temperature range: -46 to 287 deg C
Stem Material: 316
Pressure Rating: 151 Bar
Seat Material: Standard: TFM 1600, Optional: Tek-Fil, PEEK, UHMWPE, RPTFE, Metal, Cavity Fillers
Ball Material: Stainless Steel
End Connection: Threaded ASME B1.20.1 NPT, Socket Weld ASME B16.11, Extended Socket Weld, Butt Weld ASME B16.25, Extended Butt Weld, Flanged Class 600, ASME B16.10, ASME B16.5
Port Type: Full Port 1/4 - 4 , Standard Port 3/4 - 2 1/2 in
Cv: 8 - 2117
valves / ball
public
Ball valve - flanged - two piece - F15 / F30
Applications: Process, Tank Farms, Fueling, Oil & Gas. Design standard: ASME B16.34, API 608. Testing standard: API 598. Certifications: API 607, NACE MR0175, PED 2014/68/EU, ATEX 94/9/EC, GOST-R, SIL IEC 61508 SC 3.
Supplier: Bray International - Sydney
Size: 1/2 - 12 in
Body Material: Stainless Steel (CF8M), Carbon Steel (WCB), Special Alloys
Temperature range: -46 to 343 deg C
Stem Material: ASTM A479 Type 316
Pressure Rating: F15: ASME Class 150, F30: ASME Class 300, PN10 - PN40
Seat Material: Standard: TFM 1600 Optional: Tek-Fil®*, PEEK, RPTFE, UHMWPE, Metal, Cavity Filler
Ball Material: ASTM A351 Gr CF8M
End Connection: ASME Class 150, ASME Class 300, PN10 - PN40, EN 1092-1
Port Type: Full Port
Cv: 32 - 21000
valves / ball
public
Flanged Ball Valve - One Piece - Series RF15/RF30
Design standard: ASME B16.34, API 608, MSS SP72, NACE MRO175. Testing standard: API 598, ASME B16.34, MSS SP 61. Certifications: API 607.
Supplier: Bray International - Sydney
Size: 1 - 12 in
Body Material: Stainless Steel (CF8M), Carbon Steel (WCB), Special Alloys
Temperature range: -46 to 343 deg C
Stem Material: ASTM A479 Gr 316, 174-pH, Monel
Pressure Rating: RF15: Flanged ASME Class 150 RF30: Flanged ASME Class 300
Seat Material: Standard: TFM 1600 Optional: Tek-Fil, PEEK, RPTFE, UHMWPE, Metal
Ball Material: Stainless Steel (CF8M)
Port Type: Standard Port
Cv: 32 - 7700
valves / knife-gate
public
Bidirectional Knife Gate Valve - Series 762
Mining: Primary Milling, Secondary Milling Actuator Options: Direct Mounted Handwheel, Bevel Gear Operator, Double Acting Pneumatic Actuator, Hydraulic Actuator, Electric Actuator. Certifications: Canadian CRN, PED - Category I Module A (Group 2 Liquids).
Supplier: Bray International - Sydney
Size: 3 to 48 in
Body material: Ductile Iron (3" - 28") Carbon Steel (30" - 48") Check with factory for other available materials
Pressure rating: 316 SS Gate 3" - 24" 7 bar; 26" - 42" 5 bar; 44" - 48" 3 bar (Higher pressures are available with select gate mate
Stem material: 304 Stainless Steel
Gate material: 304, 316, 317 Stainless Steel, SAF 2507 Duplex, 17-4PH Stainless Steel, Hastelloy® C, Monel®, Titanium, Duplex 2205
Seat material: Nat. Rubber: 74°C Buna-N: 90°C EPDM:150°C
Flange Drilling: ASME B16.5 CL150; ASME B16.47 CL150